Wednesday, February 13, 2013

Voltage Divider

Voltage divider
PARTS AND MATERIALS
Calculator (or pencil and paper for doing arithmetic)
6-volt battery
compartmentalization of resistors between 1 K? and 100 k? in value
Im purposely restricting the subway values between 1 k? and 100 k? for the sake of obtaining accurate potentiality and current readings with your meter. With very low impedance values, the internal resistance of the ammeter has a significant impact on measurement accuracy. really high resistance values may cause problems for electric potential measurement, the internal resistance of the voltmeter substantially changing circuit resistance when it is attached in parallel with a high-value resistor.

CROSS-REFERENCES
Lessons In galvanic Circuits, Volume 1, chapter 6: Divider Circuits and Kirchhoffs Laws

LEARNING OBJECTIVES
Voltmeter use
Ammeter use
Ohmmeter use
enforce of Ohms Law
Use of Kirchhoffs Voltage Law (KVL)
Voltage divider design

SCHEMATIC DIAGRAM


ILLUSTRATION






INSTRUCTIONS
Shown here are three polar methods of circuit construction: on a breadboard, on a terminal strip, and free- underframe. Try build the same circuit each way to familiarize yourself with the different construction techniques and their respective merits.

Ordercustompaper.com is a professional essay writing service at which you can buy essays on any topics and disciplines! All custom essays are written by professional writers!

The free-form method -- where all components are connected together with alligator- style jumper wires -- is the least professional, but capture for a simple experiment such as this. breadboard construction is versatile and allows for high component density (many split in a small space), but is quite temporary. terminal figure strips offer a much more permanent form of construction at the cost of low component density.
lease three resistors from your resistor assortment and measure the resistance of each one with an ohmmeter. Note these resistance values with pen and paper, for fictional character in your circuit calculations.
Connect the three resistors in series, and to the 6-volt battery, as shown in the illustrations. Measure...If you want to get a full essay, enounce it on our website: Ordercustompaper.com



If you want to get a full essay, wisit our page: write my paper

No comments:

Post a Comment